![]() You will now see the 2 screws that secure the circuit board to the machine. Unscrew the right side panel, these are the screws on the back. Remove the top from the machine by unscrewing 2 screws on the back of the top and 1 behind the condensation tray. The PCB that we need is the print on the right side. If the machine still doesn’t work, then you can signup for repair. So no more lights or beeps when you switch the machine on – and check whether there is voltage on the outlet. What should you doĭouble-check if the machine is realy out of orderīefore you signup for repair, first double-check whether your machine realy has a defect. ![]() ![]() In other words, the PCB must be replaced and the costs are many hundreds of euros. The processor registers and error in the voltage on the circuit board. AEG / ZANUSSI / ELECTROLUX DRYER DISPLAYS ERROR CODE EHE/EH0 Error code EHE/EH0:ĮH0 has to do with a defect in the circuit of the safety relay on the control panel. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |